Flex-Jack	PoE	Functionality
Peripherals	Security
Flex-Jack

What safety standards Jack-PC complies with?

The Jack-PC is certified as any other standard thin-client (UL, CE etc.) with additional safety certification required for Power Over Ethernet device per IEEE 802.3af.

Return to Top

---

How fast a Flex-Jack port should be? 10 / 100 / 1G LAN?

For Jack-PC, 100Base-T will be good enough. For other applications Giga LAN can be used. 10Base-T is not recommended for Jack-PC use although it may be perfectly usable in small networks and less demanding applications.

Return to Top

---

Can Jack-PC operate on Giga LAN?

Yes but it will negotiate 100Base-T full duplex mode. LAN interface is 100Mbps maximum. Though as a thin-client, the Jack PC will never exceed 10 Mbps of bandwidth.

Return to Top

---

How much heat is dissipated by the Jack-PC in a Flex-Jack?

The Flex-Jack can easily dissipate 5-8W of power. Jack-PC typically dissipates less than 5W during full operation.

Return to Top

---

Can I install the Flex-Jack in panels and furniture?

Yes. Flex-Jack can be installed in any location and form if space permitting. To avoid product damage you should read the installation and safety instructions first!

Return to Top

---

Do I need special tools to install / wire Flex-Jacks?

You will need only a screwdriver to install the Flex-Jack using Chip PC's RJ-45 termination kit. To install a new installation you will need a standard IDC tool to secure the wires and cutter to cut the insulation.

Return to Top

---

Can I damage the Jack-PC if I wire the jack incorrectly?

No but it would not work (you may have a LINK but no POE or POE but no LINK).

Return to Top

---

Can I damage the Jack-PC by inserting it into the Flex-Jack rotated or upside-down?

No. The Jack-PC and all other inserts are built asymmetrically ?€“ you can only insert it in one orientation.

Return to Top

---

Can I install the Flex-Jack in a floor mounted box?

Yes, the Flex-Jack was designed to allow floor mounting inside sunken box. Keep the product protected from water and pressure damages.

Return to Top

---

Is it possible to install the devices without their decorative frames?

Yes. You can also purchase a special Flex-Jack housing with minimal surrounding frame.

Return to Top

---